Bug reporting – Guide

Viso Systems Forums Light Inspector software Bug reporting Bug reporting – Guide

Tagged: ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #3952

    If you find a bug in Light Inspector, please post it in the topic.

    To help us fix the bug please leave the information listed below.

    Light Inspector version.
    Steps on how to recreate it.
    A screenshot or video of the bug.
    Windows version and 32 or 64 bit

    #5520
    Andrew
    Participant

    Light Inspector V5.98 running on Windows 7

    When I select measurements over a hemisphere I am finding that the last measurement in alternate C-Planes (the 90 degree measurement) is not correct and can be anywhere from 25% – 50% lower than I would expect. So if I select the C-Plane increment to be 5 degrees the 90 degree Horizontal 0degree C-Plane value is correct, the next 90 degree value at the 5degree C-Plane is too low, the 90 degree Horizontal at the 10 degree C-Plane is correct, but the next 90 degree value at the 15 degree C-Plane is too low and so on. To check this I created a custom table measurement that scanned just the 90 degree points and this confirmed that there was something wrong with the alternate values at 90degrees.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic. Click here to login or register