LabSpion UV-VIS® is a specialized light measurement solution for testing UV light sources as well as ordinary luminaires in the same system. It covers all light source sizes from small lamps and LED chips to large panels and street lighting. The 2-axis LabSpion UV goniometer allows the system to measure the entire 3D distribution field for any light source. Using a spectrometer sensor and a built-in power analyzer, the unique Viso technology enables fast measurements and ensures that all data is measured quickly. The system gives you all photometric data as well as data that integration spheres provide in one measurement. Comprehensive LDT and IES simulation files are standard outputs.
The LabSpion UV-VIS goniometer is the ideal way of measuring a wide variety of light sources ranging from all UV lamps and luminaires to standard fixtures, automotive lights and LED panels. The light source is easily attached to the goniometer and rotation is both quick and silent. The LabSpion UV-VIS handles light sources up to 25 kg and 1.5 m in diameter.
The LabSpion UV-VIS system is quickly installed and comissioned. The measuring process is fully automatic with the option of manual operation. Data acquisition from a single C-plane takes 15-30 seconds, which means that takes roughly 15 minutes to collect data from all planes.
Measurement data is then automatically saved in a specific folder in the form of fixture files. They are usually exported into PDF, PNG, IES, LDT and CSV formats. You can create your own custom pdf report templates. Read more about the Light Inspector software here.
Measures UV light as well as visual light
Measures light sources up to 25 kg/ Ø150 cm (5 ft)
Fits into relatively small laboratories
All color and lumen data – no integrating sphere needed
An advanced system which is very easy to operate
Output as customizable reports or raw data
Make your own calibrations with CALI-DT300 (included)
Get more information
Viso UV goniometer specialties
UV Spectral Distribution
Get the spectral power distribution in the full range from 200 nm (far UV) to 850 nm (near IR)
Get Dose Diagrams
Enter the a specific deactivation dose e.g. for COVID-19 and get overview of the dose time needed.
Work with response curves
Bacteria and virusses respond differently to various wavelength. Enter custom response curves matching your specific germs
Full radiometric output
Work with your favorite dynamical dashboard and output setup
Reference lamp CALI-DT300 included
CALI-DT300 Front side
Special calibration lamp CALI DT-300 is included
Deuterium and tungsten light sources
CALI-DT300 Rear side
Make your own calibrations – save money and down-time
LabSpion UV-VIS goniometer specifications
Far field, type C horizontal
Standard spectrometer range
Standard 200 – 850 nm
Sensor distance range
35 cm to 1,600 cm
Light source diameter range
0 – 1.5 m at 2-axis
Light source maximum weight
Power supply input
90 to 260 VAC, 50/60 Hz
W/sr, Lumen, Peak cd, CCT, Spectrum, CRI, TM30, CQS, 3D Light Distribution, Power Specs, lm/W, UV Doses etc.
Add great tools to your system, capture more data and ease your work